View SGM4717EP-YWQ10TR_4142122.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SGM4717EP
GENERAL DESCRIPTION
The SGM4717EP is a dual, bidirectional, single-pole/double -throw (SPDT) CMOS analog switches designed to operate from a single +1.8V to +5.5V supply. It features high-bandwidth (300MHz) and low ON-resistance (4.5 typ), Targeted applications for audio switching.
4.5, 300MHz Bandwidth, Dual, SPDT Analog Switch
FEATURES
- - - - Voltage Operation : 1. 8 V to 5. 5 V On-Resistance: 4.5 (typ) at 5.0V High Bandwidth: 300 MHz Fast Switching Time tON 26 ns tOFF 20 ns High Off-Isolation: 57dB at 10MHz Low Crosstalk: 99dB at 10MHz Rail-to-Rail Operation TTL/CMOS Compatible Break-Before-Make Switching Extended Industrial Temperature Range: -40C to 85C WQFN-10 Packages
SGM4717EP features guaranteed on-resistance matching (0.3 max) between switches and guaranteed on-resistance flatness over the signal range (2.3 TYP). This ensures excellent linearity and low distortion when switching audio signals. The SGM4717EP is a committed dual single-pole/double -throw (SPDT) that consist of two normally open (NO) and two normally close (NC) switches. This configuration can be used as a dual 2-to-1 multiplexer. SGM4717EP is available in WQFN-10 package.
- - - - - - -
PIN CONFIGURATIONTOP VIEW
NO1 2 COM1 IN1 NC1 3 4 5 6 GND 7 NC2 V+ 1 10 9 8 NO2 COM2 IN2
APPLICATIONS
Portable Instrumentation Battery-Operated Equipment Computer Peripherals Cell Phones PDAs MP3s
FUNCTION TABLE
LOGIC 0 1 NO OFF ON NC ON OFF
WQFN-10
Switches Shown For Logic "0" Input
Shengbang Microelectronics Co, Ltd Tel: 86/451/84348461 www.sg-micro.com
REV. B
ELECTRICAL CHARACTERISTICS
(V+ = +2.7V to +3.6V, VIH = +1.4 V, VIL = +0.5V, TA = - 40C to +85C, Typical values are at V+ = 3.0V, TA = + 25C, unless otherwise noted.) PARAMETER ANALOG SWITCH Analog Signal Range On-Resistance On-Resistance Match Between Channels On-Resistance Flatness Source OFF Leakage current Channel ON Leakage current DIGITAL INPUTS Input High Voltage Input Low Voltage Input Leakage Current DYNAMIC CHARACTERISTICS Turn-On Time VNO, VNC, VCOM RON RON RFLAT(ON) INC(OFF), INO(OFF) INC(ON), INO(ON), ICOM(ON) VINH VINL IIN V+ = +3.6V, VIN = 0 or 5.5V VNO or VNC = 1.5V, RL = 300, CL = 35pF, Test Circuit 2; VIH = 1.5V, VIL = 0V VNO or VNC = 1.5V, RL = 300, CL = 35pF, Test Circuit 2; VIH = 1.5V, VIL = 0V VNO1 or VNC1 = VNO2 or VNC2 = 3V, RL = 300, CL = 35pF, Test Circuit 3 RS = 39, CL = 50pF, Test Circuit 4 f = 10MHz RL = 50, CL = 5pF, Signal = 0dBm, f = 1MHz Test Circuit 5 f = 10MHz RL = 50, CL = 5pF, f = 1MHz Test Circuit 6 Signal = 0dBm, RL = 50, CL = 5pF, Test Circuit 7 V+ = 2.7V, VNO or VNC = 1.5V, ICOM = -10 mA, Test Circuit 1 V+ = 2.7V, VNO or VNC = 1.5V, ICOM = -10 mA, Test Circuit 1 V+ = 2.7V, VNO or VNC = 1.0V, 1.5V, 2.0V, ICOM = -10 mA, Test Circuit 1 V+ = 3.6V, VNO or VNC = 0.3V, 3.3V, VCOM = 0.3V, 3.3V, V+ = 3.6V, VCOM = 0.3V, 3.3V, VNO or VNC = 0.3V, 3.3V, or floating - 40C to +85C +25C - 40C to +85C +25C - 40C to +85C +25C - 40C to +85C - 40C to +85C - 40C to +85C 0 V+ 10 10.5 0.25 0.6 0.8 3 4 7 4.3 1 1 V A A SYMBOL CONDITIONS TEMP MIN TPY MAX UNITS
- 40C to +85C - 40C to +85C - 40C to +85C
1 0.5 1
V V A
tON
+25C
23
ns
Turn-Off Time Break-Before-Make Time Delay Skew Off Isolation
tOFF tD tSKEW OISO
+25C +25C +25C +25C +25C +25C +25C +25C - 40C to +85C
22 4 5 -57 -76 -98 -103 300 1.8 5.5 5
ns ns ns dB dB dB dB MHz V A
Channel-to-Channel Crosstalk Bandwidth -3 dB POWER REQUIREMENTS Power Supply Range Power Supply Current
XTALK BW
V+ I+ V+ = +5.5V, VIN = 0V or V+
- 40C to +85C
Specifications subject to change without notice.
2
SGM4717EP
ELECTRICAL CHARACTERISTICS
(V+ = +4.5V to +5.5V, VIH = +2.0 V, VIL = +0.8V, TA = - 40C to +85C, Typical values are at V+ = 5.0V, TA = + 25C, unless otherwise noted.) PARAMETER ANALOG SWITCH Analog Signal Range On-Resistance On-Resistance Match Between Channels On-Resistance Flatness Source OFF Leakage current Channel ON Leakage current DIGITAL INPUTS Input High Voltage Input Low Voltage Input Leakage Current DYNAMIC CHARACTERISTICS Turn-On Time tON VNO or VNC = 3.0V, RL = 300, CL = 35pF, Test Circuit 2; VIH = 1.5V, VIL = 0V VNO or VNC = 3.0V, RL = 300, CL = 35pF, Test Circuit 2; VIH = 1.5V, VIL = 0V VNO1 or VNC1 = VNO2 or VNC2 = 3V, RL = 300, CL = 35pF, Test Circuit 3 RS = 39, CL = 50pF, Test Circuit 4 f = 10MHz RL = 50, CL = 5pF, Signal = 0dBm, f = 1MHz Test Circuit 5 f = 10MHz RL = 50, CL = 5pF, f = 1MHz Test Circuit 6 VCOM = 2VP-P, RL = 50, CL = 5pF Signal = 0dBm, RL = 50, CL = 5pF, Test Circuit 7 +25C 26 ns VNO, VNC, VCOM RON RON RFLAT(ON) INC(OFF), INO(OFF) INC(ON), INO(ON), ICOM(ON) VINH VINL IIN V+ = +5.5V, VIN = 0 or 5.5V V+ = 4.5V, VNO or VNC = 3.5V, ICOM = -10 mA, Test Circuit 1 V+ = 4.5V, VNO or VNC = 3.5V, ICOM = -10 mA, Test Circuit 1 V+ = 4.5V, VNO or VNC = 1.0V, 2.0V, 3.5V, ICOM = -10 mA, Test Circuit 1 V+ = 5.5V, VNO or VNC = 1.0V, 4.5V, VCOM = 1.0V, 4.5V, V+ = 5.5V, VCOM = 1.0V, 4.5V, VNO or VNC = 1.0V, 4.5V, or floating - 40C to +85C +25C - 40C to +85C +25C - 40C to +85C +25C - 40C to +85C - 40C to +85C - 40C to +85C - 40C to +85C - 40C to +85C - 40C to +85C 0 4.5 0.15 2.3 V+ 8 8.5 0.3 0.8 3.3 3.7 1 1 V A A SYMBOL CONDITIONS TEMP MIN TPY MAX UNITS
1.5 0.6 1
V V A
Turn-Off Time Break-Before-Make Time Delay Skew Off Isolation
tOFF tD tSKEW OISO
+25C +25C +25C +25C +25C +25C +25C +25C +25C - 40C to +85C
20 4 5.8 -57 -76 -99 -110 300 1.8 5.5 5
ns ns ns dB dB dB dB % MHz V A
Channel-to-Channel Crosstalk Total Harmonic Distortion Bandwidth -3 dB POWER REQUIREMENTS Power Supply Range Power Supply Current
XTALK THD BW
V+ I+ V+ = +5.5V, VIN = 0V or V+
- 40C to +85C
Specifications subject to change without notice.
3
SGM4717EP
ORDERING INFORMATION
MODEL SGM4717EP PINPACKAGE SPECIFIED TEMPERATURE RANGE ORDERING NUMBER SGM4717EP-YWQ10/TR PACKAGE MARKING 4717E PACKAGE OPTION Tape and Reel, 3000
WQFN-10
- 40C to +85C
ABSOLUTE MAXIMUM RATINGS
V+ , IN to GND.............................................................- 0.3V to +6V Analog, Digital voltage range(1)................... - 0.3V to (V+ + 0.3V) Continuous Current NO, NC, or COM..........................200mA Peak Current NO, NC, or COM......................................300mA Operating Temperature Range..............................- 40C to +85C Junction Temperature...........................................................+150C Storage Temperature.............................................- 65C to +150C Lead Temperature (soldering, 10s).....................................+260C ESD HBM ...............................................................................2000V
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. (1) Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
PIN DESCRIPTION
NAME V+ GND IN1, IN2 COM1, COM2 NO1, NO2 NC1, NC2 FUNCTION Power supply ground Digital control pin to connect the COM terminal to the NO or NC terminals Common terminal Normally-open terminal Normally-closed terminal
Note: NO, NC and COM terminal may be an input or output.
4
SGM4717EP
TYPICAL PERFORMANCE CHARACTERISTICS
On Response vs.Frequency 3 V+ = +3V TA = +25 0 On Response(dB)
On Response(dB) 0 3 V+ = +5V TA = +25 On Response vs.Frequency
-3
-3
-6
-6
-9 1 10 100 Frequency(MHz) 1000
-9 1 10 100 Frequency(MHz) 1000
Response vs.Frequency 20 0 -20 On Response(dB) -40 -60 -80 -100 -120 -140 0.01 V+ = +3V TA = +25 0.1 1 10 Frequency(MHz) 100 1000 OFF-ISOLATION CROSSTALK ON-LOSS
On Response(dB) 20 0 -20 -40 -60 -80 -100 -120 -140 0.01
Response vs.Frequency
ON-LOSS
OFF-ISOLATION CROSSTALK V+ = +5V TA = +25 0.1 1 10 Frequency(MHz) 100 1000
SGM4717EP
TEST CIRCUITS
10mA V1
NO or NC VNO or VNC
COM
RON = V1/10mA
Test Circuit 1. On Resistance
V+ 0.1F
V+ NO or NC VNO or VNC IN GND COM RL 300 VOUT CL 35pF
VIN
50%
50%
VOUT tON
90%
90%
tOFF
Test Circuit 2. Switching Times
V+ 0.1F
NC VNO or VNC IN NO
V+ COM RL 300 GND VOUT CL 35pF VIN 0 50%
VNO or VNC VOUT tD 90%
Test Circuit 3. Break-Before-Make Time Delay, tD
SGM4717EP
TEST CIRCUITS (Cont.)
SGM4717EP
IN+ RS
NO1 or NC1
COM1 CL
OUT+
Rise Time Delay = |tINRISE-tOUTRISE| Fall Time Delay = |tINFALL-tOUTFALL| Rise Time to Fall Time Mismatch = |tOUTFALL-tOUTRISE|
IN1
IN-
RS IN2
NO2 or NC2
COM2 CL
OUT-
tINFALL
tINRISE
VIN+
V+ 0V V+
50%
90% 10%
90% 10%
VIN-
50%
0V
tINFALL tINRISE
VOUT+
V+
50%
90% 10%
90% 10%
0V V+
VOUTON 50%
0V
tSKEW
Test Circuit 4. Output Signal Skew
V+ 0.1F
V+ NO or NC Source Signal IN GND COM CL 5pF VOUT
Test Circuit 5. Off Isolation
SGM4717EP
TEST CIRCUITS (Cont.)
V+ 0.1F
V+ NO or NC Source Signal IN1 COM RL 50 CL 5pF
IN2 NO or NC GND COM RL 50 VNO or VNC VOUT CL 5pF
N.C.
VOUT
Channel To Channel Crosstalk = -20
Test Circuit 6. Channel-to-Channel Crosstalk
V+ 0.1F
V+ NO or NC Source Signal IN GND COM VOUT CL 5pF
Test Circuit 7. Bandwidth
SGM4717EP
PACKAGE OUTLINE DIMENSIONS
WQFN-10
1.800 0.050 0.400 0.050 (x9)
0.400 TYP
PIN #1 IDENTIFICATION CHAMFER 0.350x45
1.400 0.050
0.800 REF
PIN #1 DOT BY MARKING
TOP VIEW
0.5000.050
0.2000.050
BOTTOM VIEW
0.7500.050
0.203 REF 0.000-0.050
SIDE VIEW
Note: All linear dimensions are in millimeters.
SGM4717EP
REVISION HISTORY
Location 10/07-- Data Sheet changed from REV.A to REV.B
Changes to TYPICAL PERFORMANCE CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Page
Shengbang Microelectronics Co, Ltd
Unit 3, ChuangYe Plaza No.5, TaiHu Northern Street, YingBin Road Centralized Industrial Park Harbin Development Zone Harbin, HeiLongJiang 150078 P.R. China Tel.: 86-451-84348461 Fax: 86-451-84308461 www.sg-micro.com
SGM4717EP

▲Up To Search▲

Price & Availability of SGM4717EP-YWQ10TR

	To Download SGM4717EP-YWQ10TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .